.\"	$NetBSD: math.3,v 1.28.14.1 2023/08/11 14:44:19 martin Exp $
.\"
.\" Copyright (c) 1985 Regents of the University of California.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	from: @(#)math.3	6.10 (Berkeley) 5/6/91
.\"
.Dd May 7, 2023
.Dt MATH 3
.Os
.Sh NAME
.Nm math
.Nd introduction to mathematical library functions
.Sh LIBRARY
.Lb libm
.Sh SYNOPSIS
.In math.h
.Sh DESCRIPTION
These functions constitute the C
.Lb libm .
Declarations for these functions may be obtained from the include file
.In math.h .
.\" The Fortran math library is described in ``man 3f intro''.
.Ss List of Functions
.Bl -column "copysignX" "gammaX3XX" "inverse trigonometric funcX"
.It Sy Name Ta Sy Man page Ta Sy Description Ta Sy Error Bound Dv ( ULP Ns No s)
.It acos Ta Xr acos 3 Ta inverse trigonometric function Ta 3
.It acosh Ta Xr acosh 3 Ta inverse hyperbolic function Ta 3
.It asin Ta Xr asin 3 Ta inverse trigonometric function Ta 3
.It asinh Ta Xr asinh 3 Ta inverse hyperbolic function Ta 3
.It atan Ta Xr atan 3 Ta inverse trigonometric function Ta 1
.It atanh Ta Xr atanh 3 Ta inverse hyperbolic function Ta 3
.It atan2 Ta Xr atan2 3 Ta inverse trigonometric function Ta 2
.It cbrt Ta Xr sqrt 3 Ta cube root Ta 1
.It ceil Ta Xr ceil 3 Ta integer no less than Ta 0
.It copysign Ta Xr copysign 3 Ta copy sign bit Ta 0
.It cos Ta Xr cos 3 Ta trigonometric function Ta 1
.It cosh Ta Xr cosh 3 Ta hyperbolic function Ta 3
.It erf Ta Xr erf 3 Ta error function Ta ???
.It erfc Ta Xr erf 3 Ta complementary error function Ta ???
.It exp Ta Xr exp 3 Ta base e exponential Ta 1
.It exp2 Ta Xr exp2 3 Ta base 2 exponential Ta ???
.It expm1 Ta Xr expm1 3 Ta exp(x)\-1 Ta 1
.It fabs Ta Xr fabs 3 Ta absolute value Ta 0
.It fdim Ta Xr fdim 3 Ta positive difference Ta ???
.It finite Ta Xr finite 3 Ta test for finity Ta 0
.It floor Ta Xr floor 3 Ta integer no greater than Ta 0
.It fma Ta Xr fma 3 Ta fused multiply-add Ta ???
.It fmax Ta Xr fmax 3 Ta maximum Ta 0
.It fmin Ta Xr fmin 3 Ta minimum Ta 0
.It fmod Ta Xr fmod 3 Ta remainder Ta ???
.It hypot Ta Xr hypot 3 Ta Euclidean distance Ta 1
.It ilogb Ta Xr ilogb 3 Ta exponent extraction Ta 0
.It isinf Ta Xr isinf 3 Ta test for infinity Ta 0
.It isnan Ta Xr isnan 3 Ta test for not-a-number Ta 0
.It j0 Ta Xr j0 3 Ta Bessel function Ta ???
.It j1 Ta Xr j0 3 Ta Bessel function Ta ???
.It jn Ta Xr j0 3 Ta Bessel function Ta ???
.It lgamma Ta Xr lgamma 3 Ta log gamma function Ta ???
.It log Ta Xr log 3 Ta natural logarithm Ta 1
.It log10 Ta Xr log 3 Ta logarithm to base 10 Ta 3
.It log1p Ta Xr log 3 Ta log(1+x) Ta 1
.It nan Ta Xr nan 3 Ta return quiet \*(Na Ta 0
.It nextafter Ta Xr nextafter 3 Ta next representable number Ta 0
.It pow Ta Xr pow 3 Ta exponential x**y Ta 60\-500
.It remainder Ta Xr remainder 3 Ta remainder Ta 0
.It rint Ta Xr rint 3 Ta round to nearest integer Ta 0
.It scalbn Ta Xr scalbn 3 Ta exponent adjustment Ta 0
.It sin Ta Xr sin 3 Ta trigonometric function Ta 1
.It sinh Ta Xr sinh 3 Ta hyperbolic function Ta 3
.It sqrt Ta Xr sqrt 3 Ta square root Ta 1
.It tan Ta Xr tan 3 Ta trigonometric function Ta 3
.It tanh Ta Xr tanh 3 Ta hyperbolic function Ta 3
.It trunc Ta Xr trunc 3 Ta nearest integral value Ta 3
.It y0 Ta Xr j0 3 Ta Bessel function Ta ???
.It y1 Ta Xr j0 3 Ta Bessel function Ta ???
.It yn Ta Xr j0 3 Ta Bessel function Ta ???
.El
.Ss List of Defined Values
.Bl -column "M_2_SQRTPIXX" "1.12837916709551257390XX" "2/sqrt(pi)XXX"
.It Sy Name Ta Sy Value Ta Sy Description
.It M_E	2.7182818284590452354	e
.It M_LOG2E	1.4426950408889634074	log 2e
.It M_LOG10E	0.43429448190325182765	log 10e
.It M_LN2	0.69314718055994530942	log e2
.It M_LN10	2.30258509299404568402	log e10
.It M_PI	3.14159265358979323846	pi
.It M_PI_2	1.57079632679489661923	pi/2
.It M_PI_4	0.78539816339744830962	pi/4
.It M_1_PI	0.31830988618379067154	1/pi
.It M_2_PI	0.63661977236758134308	2/pi
.It M_2_SQRTPI	1.12837916709551257390	2/sqrt(pi)
.It M_SQRT2	1.41421356237309504880	sqrt(2)
.It M_SQRT1_2	0.70710678118654752440	1/sqrt(2)
.El
.Sh NOTES
In 4.3 BSD, distributed from the University of California
in late 1985, most of the foregoing functions come in two
versions, one for the double\-precision "D" format in the
DEC VAX\-11 family of computers, another for double\-precision
arithmetic conforming to the IEEE Standard 754 for Binary
Floating\-Point Arithmetic.
The two versions behave very
similarly, as should be expected from programs more accurate
and robust than was the norm when UNIX was born.
For instance, the programs are accurate to within the numbers
of
.Dv ULPs
tabulated above; an
.Dv ULP
is one Unit in the Last Place.
And the programs have been cured of anomalies that
afflicted the older math library
in which incidents like
the following had been reported:
.Bd -literal -offset indent
sqrt(\-1.0) = 0.0 and log(\-1.0) = \-1.7e38.
cos(1.0e\-11) > cos(0.0) > 1.0.
pow(x,1.0) \(!= x when x = 2.0, 3.0, 4.0, ..., 9.0.
pow(\-1.0,1.0e10) trapped on Integer Overflow.
sqrt(1.0e30) and sqrt(1.0e\-30) were very slow.
.Ed
However the two versions do differ in ways that have to be
explained, to which end the following notes are provided.
.Ss DEC VAX\-11 D_floating\-point
This is the format for which the original math library
was developed, and to which this manual is still principally dedicated.
It is
.Em the
double\-precision format for the PDP\-11
and the earlier VAX\-11 machines; VAX\-11s after 1983 were
provided with an optional "G" format closer to the IEEE
double\-precision format.
The earlier DEC MicroVAXs have no D format, only G double\-precision.
(Why?
Why not?)
.Pp
Properties of D_floating\-point:
.Bl -hang -offset indent
.It Wordsize :
64 bits, 8 bytes.
.It Radix :
Binary.
.It Precision :
56 significant bits, roughly like 17 significant decimals.
If x and x' are consecutive positive D_floating\-point
numbers (they differ by 1
.Dv ULP ) ,
then
.Dl 1.3e\-17 < 0.5**56 < (x'\-x)/x \*[Le] 0.5**55 < 2.8e\-17.
.It Range :
.Bl -column "Underflow thresholdX" "2.0**127X"
.It Overflow threshold	= 2.0**127	= 1.7e38.
.It Underflow threshold	= 0.5**128	= 2.9e\-39.
.El
.Em NOTE: THIS RANGE IS COMPARATIVELY NARROW.
.Pp
Overflow customarily stops computation.
Underflow is customarily flushed quietly to zero.
.Em CAUTION :
It is possible to have x
\(!=
y and yet x\-y = 0 because of underflow.
Similarly x > y > 0 cannot prevent either x\(**y = 0
or y/x = 0 from happening without warning.
.It Zero is represented ambiguously :
Although 2**55 different representations of zero are accepted by
the hardware, only the obvious representation is ever produced.
There is no \-0 on a VAX.
.It \*(If is not part of the VAX architecture .
.It Reserved operands :
of the 2**55 that the hardware
recognizes, only one of them is ever produced.
Any floating\-point operation upon a reserved
operand, even a MOVF or MOVD, customarily stops
computation, so they are not much used.
.It Exceptions :
Divisions by zero and operations that
overflow are invalid operations that customarily
stop computation or, in earlier machines, produce
reserved operands that will stop computation.
.It Rounding :
Every rational operation  (+, \-, \(**, /) on a
VAX (but not necessarily on a PDP\-11), if not an
over/underflow nor division by zero, is rounded to
within half an
.Dv ULP ,
and when the rounding error is
exactly half an
.Dv ULP
then rounding is away from 0.
.El
.Pp
Except for its narrow range, D_floating\-point is one of the
better computer arithmetics designed in the 1960's.
Its properties are reflected fairly faithfully in the elementary
functions for a VAX distributed in 4.3 BSD.
They over/underflow only if their results have to lie out of range
or very nearly so, and then they behave much as any rational
arithmetic operation that over/underflowed would behave.
Similarly, expressions like log(0) and atanh(1) behave
like 1/0; and sqrt(\-3) and acos(3) behave like 0/0;
they all produce reserved operands and/or stop computation!
The situation is described in more detail in manual pages.
.Pp
.Em This response seems excessively punitive, so it is destined
.Em to be replaced at some time in the foreseeable future by a
.Em more flexible but still uniform scheme being developed to
.Em handle all floating\-point arithmetic exceptions neatly.
.Pp
How do the functions in 4.3 BSD's new math library for UNIX
compare with their counterparts in DEC's VAX/VMS library?
Some of the VMS functions are a little faster, some are
a little more accurate, some are more puritanical about
exceptions (like pow(0.0,0.0) and atan2(0.0,0.0)),
and most occupy much more memory than their counterparts in
libm.
The VMS codes interpolate in large table to achieve
speed and accuracy; the libm codes use tricky formulas
compact enough that all of them may some day fit into a ROM.
.Pp
More important, DEC regards the VMS codes as proprietary
and guards them zealously against unauthorized use.
But the libm codes in 4.3 BSD are intended for the public domain;
they may be copied freely provided their provenance is always
acknowledged, and provided users assist the authors in their
researches by reporting experience with the codes.
Therefore no user of UNIX on a machine whose arithmetic resembles
VAX D_floating\-point need use anything worse than the new libm.
.Ss IEEE STANDARD 754 Floating\-Point Arithmetic
This standard is on its way to becoming more widely adopted
than any other design for computer arithmetic.
VLSI chips that conform to some version of that standard have been
produced by a host of manufacturers, among them ...
.Bl -column "Intel i8070, i80287XX"
.It Intel i8087, i80287	National Semiconductor  32081
.It 68881	Weitek WTL-1032, ... , -1165
.It Zilog Z8070	Western Electric (AT&T) WE32106.
.El
Other implementations range from software, done thoroughly
in the Apple Macintosh, through VLSI in the Hewlett\-Packard
9000 series, to the ELXSI 6400 running ECL at 3 Megaflops.
Several other companies have adopted the formats
of IEEE 754 without, alas, adhering to the standard's way
of handling rounding and exceptions like over/underflow.
The DEC VAX G_floating\-point format is very similar to the IEEE
754 Double format, so similar that the C programs for the
IEEE versions of most of the elementary functions listed
above could easily be converted to run on a MicroVAX, though
nobody has volunteered to do that yet.
.Pp
The codes in 4.3 BSD's libm for machines that conform to
IEEE 754 are intended primarily for the National Semiconductor 32081
and WTL 1164/65.
To use these codes with the Intel or Zilog
chips, or with the Apple Macintosh or ELXSI 6400, is to
forego the use of better codes provided (perhaps freely) by
those companies and designed by some of the authors of the
codes above.
Except for
.Fn atan ,
.Fn cbrt ,
.Fn erf ,
.Fn erfc ,
.Fn hypot ,
.Fn j0-jn ,
.Fn lgamma ,
.Fn pow ,
and
.Fn y0\-yn ,
the Motorola 68881 has all the functions in libm on chip,
and faster and more accurate;
it, Apple, the i8087, Z8070 and WE32106 all use 64 significant bits.
The main virtue of 4.3 BSD's
libm codes is that they are intended for the public domain;
they may be copied freely provided their provenance is always
acknowledged, and provided users assist the authors in their
researches by reporting experience with the codes.
Therefore no user of UNIX on a machine that conforms to
IEEE 754 need use anything worse than the new libm.
.Pp
Properties of IEEE 754 Double\-Precision:
.Bl -hang -offset indent
.It Wordsize :
64 bits, 8 bytes.
.It Radix :
Binary.
.It Precision :
53 significant bits, roughly like 16 significant decimals.
If x and x' are consecutive positive Double\-Precision
numbers (they differ by 1
.Dv ULP ) ,
then
.Dl 1.1e\-16 < 0.5**53 < (x'\-x)/x \*[Le] 0.5**52 < 2.3e\-16.
.It Range :
.Bl -column "Underflow thresholdX" "2.0**1024X"
.It Overflow threshold	= 2.0**1024	= 1.8e308
.It Underflow threshold	= 0.5**1022	= 2.2e\-308
.El
Overflow goes by default to a signed \*(If.
Underflow is
.Sy Gradual ,
rounding to the nearest
integer multiple of 0.5**1074 = 4.9e\-324.
.It Zero is represented ambiguously as +0 or \-0:
Its sign transforms correctly through multiplication or
division, and is preserved by addition of zeros
with like signs; but x\-x yields +0 for every
finite x.
The only operations that reveal zero's
sign are division by zero and copysign(x,\(+-0).
In particular, comparison (x > y, x \*[Ge] y, etc.)
cannot be affected by the sign of zero; but if
finite x = y then \*(If
\&= 1/(x\-y)
\(!=
\-1/(y\-x) =
\- \*(If .
.It \*(If is signed :
it persists when added to itself
or to any finite number.
Its sign transforms
correctly through multiplication and division, and
\*(If (finite)/\(+- \0=\0\(+-0
(nonzero)/0 =
\(+- \*(If.
But
\(if\-\(if, \(if\(**0 and \(if/\(if
are, like 0/0 and sqrt(\-3),
invalid operations that produce \*(Na.
.It Reserved operands :
there are 2**53\-2 of them, all
called \*(Na (Not A Number).
Some, called Signaling \*[Na]s, trap any floating\-point operation
performed upon them; they are used to mark missing
or uninitialized values, or nonexistent elements of arrays.
The rest are Quiet \*[Na]s; they are
the default results of Invalid Operations, and
propagate through subsequent arithmetic operations.
If x
\(!=
x then x is \*(Na; every other predicate
(x > y, x = y, x < y, ...) is FALSE if \*(Na is involved.
.Pp
.Em NOTE :
Trichotomy is violated by \*(Na.
Besides being FALSE, predicates that entail ordered
comparison, rather than mere (in)equality,
signal Invalid Operation when \*(Na is involved.
.It Rounding :
Every algebraic operation (+, \-, \(**, /,
\(sr)
is rounded by default to within half an
.Dv ULP ,
and when the rounding error is exactly half an
.Dv ULP
then the rounded value's least significant bit is zero.
This kind of rounding is usually the best kind,
sometimes provably so; for instance, for every
x = 1.0, 2.0, 3.0, 4.0, ..., 2.0**52, we find
(x/3.0)\(**3.0 == x and (x/10.0)\(**10.0 == x and ...
despite that both the quotients and the products
have been rounded.
Only rounding like IEEE 754 can do that.
But no single kind of rounding can be
proved best for every circumstance, so IEEE 754
provides rounding towards zero or towards
+\*(If
or towards
\-\*(If
at the programmer's option.
And the same kinds of rounding are specified for
Binary\-Decimal Conversions, at least for magnitudes
between roughly 1.0e\-10 and 1.0e37.
.It Exceptions :
IEEE 754 recognizes five kinds of floating\-point exceptions,
listed below in declining order of probable importance.
.Bl -column "Invalid OperationX" "Gradual OverflowX"
.It Sy Exception Ta Sy Default Result
.It Invalid Operation	\*(Na, or FALSE
.It Overflow	\(+-\(if
.It Divide by Zero	\(+-\(if \}
.It Underflow	Gradual Underflow
.It Inexact	Rounded value
.El
.Pp
.Em NOTE :
An Exception is not an Error unless handled badly.
What makes a class of exceptions exceptional
is that no single default response can be satisfactory
in every instance.
On the other hand, if a default
response will serve most instances satisfactorily,
the unsatisfactory instances cannot justify aborting
computation every time the exception occurs.
.El
.Pp
For each kind of floating\-point exception, IEEE 754
provides a Flag that is raised each time its exception
is signaled, and stays raised until the program resets it.
Programs may also test, save and restore a flag.
Thus, IEEE 754 provides three ways by which programs
may cope with exceptions for which the default result
might be unsatisfactory:
.Bl -enum
.It
Test for a condition that might cause an exception
later, and branch to avoid the exception.
.It
Test a flag to see whether an exception has occurred
since the program last reset its flag.
.It
Test a result to see whether it is a value that only
an exception could have produced.
.Em CAUTION :
The only reliable ways to discover
whether Underflow has occurred are to test whether
products or quotients lie closer to zero than the
underflow threshold, or to test the Underflow flag.
(Sums and differences cannot underflow in
IEEE 754; if x
\(!=
y then x\-y is correct to
full precision and certainly nonzero regardless of
how tiny it may be.)
Products and quotients that
underflow gradually can lose accuracy gradually
without vanishing, so comparing them with zero
(as one might on a VAX) will not reveal the loss.
Fortunately, if a gradually underflowed value is
destined to be added to something bigger than the
underflow threshold, as is almost always the case,
digits lost to gradual underflow will not be missed
because they would have been rounded off anyway.
So gradual underflows are usually
.Em provably
ignorable.
The same cannot be said of underflows flushed to 0.
.Pp
At the option of an implementor conforming to IEEE 754,
other ways to cope with exceptions may be provided:
.It
ABORT.
This mechanism classifies an exception in
advance as an incident to be handled by means
traditionally associated with error\-handling
statements like "ON ERROR GO TO ...".
Different languages offer different forms of this statement,
but most share the following characteristics:
.Bl -dash
.It
No means is provided to substitute a value for
the offending operation's result and resume
computation from what may be the middle of an expression.
An exceptional result is abandoned.
.It
In a subprogram that lacks an error\-handling
statement, an exception causes the subprogram to
abort within whatever program called it, and so
on back up the chain of calling subprograms until
an error\-handling statement is encountered or the
whole task is aborted and memory is dumped.
.El
.It
STOP.
This mechanism, requiring an interactive
debugging environment, is more for the programmer
than the program.
It classifies an exception in
advance as a symptom of a programmer's error; the
exception suspends execution as near as it can to
the offending operation so that the programmer can
look around to see how it happened.
Quite often
the first several exceptions turn out to be quite
unexceptionable, so the programmer ought ideally
to be able to resume execution after each one as if
execution had not been stopped.
.It
\&... Other ways lie beyond the scope of this document.
.El
.Pp
The crucial problem for exception handling is the problem of
Scope, and the problem's solution is understood, but not
enough manpower was available to implement it fully in time
to be distributed in 4.3 BSD's libm.
Ideally, each elementary function should act
as if it were indivisible, or atomic, in the sense that ...
.Bl -enum
.It
No exception should be signaled that is not deserved by
the data supplied to that function.
.It
Any exception signaled should be identified with that
function rather than with one of its subroutines.
.It
The internal behavior of an atomic function should not
be disrupted when a calling program changes from
one to another of the five or so ways of handling
exceptions listed above, although the definition
of the function may be correlated intentionally
with exception handling.
.El
.Pp
Ideally, every programmer should be able
.Em conveniently
to turn a debugged subprogram into one that appears atomic to
its users.
But simulating all three characteristics of an
atomic function is still a tedious affair, entailing hosts
of tests and saves\-restores; work is under way to ameliorate
the inconvenience.
.Pp
Meanwhile, the functions in libm are only approximately atomic.
They signal no inappropriate exception except possibly ...
.Bl -ohang -offset indent
.It Over/Underflow
when a result, if properly computed, might have lain barely within range, and
.It Inexact in Fn cbrt , Fn hypot , Fn log10 No and Fn pow
when it happens to be exact, thanks to fortuitous cancellation of errors.
.El
Otherwise, ...
.Bl -ohang -offset indent
.It Invalid Operation is signaled only when
any result but \*(Na would probably be misleading.
.It Overflow is signaled only when
the exact result would be finite but beyond the overflow threshold.
.It Divide\-by\-Zero is signaled only when
a function takes exactly infinite values at finite operands.
.It Underflow is signaled only when
the exact result would be nonzero but tinier than the underflow threshold.
.It Inexact is signaled only when
greater range or precision would be needed to represent the exact result.
.El
.\" .Sh FILES
.\" .Bl -tag -width /usr/lib/libm_p.a -compact
.\" .It Pa /usr/lib/libm.a
.\" the static math library
.\" .It Pa /usr/lib/libm.so
.\" the dynamic math library
.\" .It Pa /usr/lib/libm_p.a
.\" the static math library compiled for profiling
.\" .El
.Sh SEE ALSO
An explanation of IEEE 754 and its proposed extension p854
was published in the IEEE magazine MICRO in August 1984 under
the title "A Proposed Radix\- and Word\-length\-independent
Standard for Floating\-point Arithmetic" by W. J. Cody et al.
The manuals for Pascal, C and BASIC on the Apple Macintosh
document the features of IEEE 754 pretty well.
Articles in the IEEE magazine COMPUTER vol. 14 no. 3 (Mar. 1981),
and in the ACM SIGNUM Newsletter Special Issue of
Oct. 1979, may be helpful although they pertain to
superseded drafts of the standard.
.Sh BUGS
When signals are appropriate, they are emitted by certain
operations within the codes, so a subroutine\-trace may be
needed to identify the function with its signal in case
method 5) above is in use.
And the codes all take the
IEEE 754 defaults for granted; this means that a decision to
trap all divisions by zero could disrupt a code that would
otherwise get correct results despite division by zero.