X
as an XDMCP Client
xdm
as an XDMCP Server
This mini-HOWTO is a guide how to do remote X applications. It was written for several reasons.
xhost +hostname
'' or even
``xhost +
'' to allow X connections. This is ridiculously
insecure, and there are better methods.This document has been written with unix-like systems in mind. If either your local or remote operating system are of another flavour, you may find here how things work. However, you will have to translate examples yourself to apply to your own system(s).
The most recent version of this document is always available on WWW at http://www.xs4all.nl/~zweije/xauth.html. It is also available as the Linux Remote X Apps mini-HOWTO at http://sunsite.unc.edu/LDP/HOWTO/mini/Remote-X-Apps. Linux (mini-)HOWTOs are available by http or ftp from sunsite.unc.edu.
This is version 0.7.5. No guarantees, only good intentions. I'm open
to suggestions, ideas, additions, useful pointers, (typo) corrections,
etc... I want this to remain a simple readable document, though, in the
best-meant HOWTO style. Flames to /dev/null
. This document is
released under version 1.1 of the
GNU Free Documentation Licence.
Contents last updated on 8 December 2001 by Vincent Zweije
A related document on WWW is ``What to do when Tk says that your display is insecure'', http://ce-toolkit.crd.ge.com/tkxauth/. It was written by Kevin Kenny. It suggests a similar solution to X authentication to that in this document (xauth). However, Kevin aims more at using xdm to steer xauth for you.
The X System Window System Vol. 8 ``X Window System Administrator's Guide'' from O'Reilly and Associates has also been brought to my attention and confirmed as a good source of information. However, it has not been revised since its original publication in 1992. As such it only covers X11R4 and X11R5, anything specific to X11R6 will not be covered.
Yet another document much like the one you're reading now, titled ``Securing X Windows'', is available at http://ciac.llnl.gov/ciac/documents/ciac2316.html.
Also check out usenet newsgroups, such as comp.windows.x
,
comp.os.linux.x
, and comp.os.linux.networking
.
You're using two computers. You're using the X window system of the first to type to and look at. You're using the second to do some important graphical work. You want the second to show its output on the display of the first. The X window system makes this possible.
Of course, you need a network connection for this. Preferably a fast one; the X protocol is a network hog. But with a little patience and suitable protocol compression, you can even run applications over a modem. For X protocol compression, you might want to check out dxpc http://www.vigor.nu/dxpc/ or LBX http://www.paulandlesley.org/faqs/LBX-HOWTO.html (also known as the LBX mini-HOWTO).
You must do two things to achieve all this:
The magic word is DISPLAY
. In the X window system, a display consists
(simplified) of a keyboard, a mouse and a screen. A display is managed
by a server program, known as an X server. The server serves displaying
capabilities to other programs that connect to it.
A display is indicated with a name, for instance:
DISPLAY=light.uni.verse:0
DISPLAY=localhost:4
DISPLAY=:0
The display consists of a hostname (such as light.uni.verse
and
localhost
), a colon (:
), and a sequence number (such as 0
and 4
). The hostname of the display is the name of the computer
where the X server runs. An omitted hostname means the local host. The
sequence number is usually 0 -- it can be varied if there are multiple
displays connected to one computer.
If you ever come across a display indication with an extra .n
attached to it, that's the screen number. A display can actually have
multiple screens. Usually there's only one screen though, with number
n=0
, so that's the default.
Other forms of DISPLAY
exist, but the above will do for our purposes.
For the technically curious:
hostname:D.S
means screen S
on display D
of host
hostname
; the X server for this display is listening at TCP
port 6000+D
.
host/unix:D.S
means screen S
on display D
of host host
; the X server for this display is listening
at UNIX domain socket /tmp/.X11-unix/XD
(so it's only
reachable from host
).
:D.S
is equivalent to host/unix:D.S
, where host
is the local hostname.
The client program (for instance, your graphics application) knows
which display to connect to by inspecting the DISPLAY
environment
variable. This setting can be overridden, though, by giving the client
the command line argument -display hostname:0
when it's started. Some
examples may clarify things.
Our computer is known to the outside as light, and we're in domain
uni.verse. If we're running a normal X server, the display is known as
light.uni.verse:0
. We want to run the drawing program xfig on a remote
computer, called dark.matt.er
, and display its output here on light.
Suppose you have already telnetted into the remote computer,
dark.matt.er
.
If you have csh running on the remote computer:
dark% setenv DISPLAY light.uni.verse:0
dark% xfig &
or alternatively:
dark% xfig -display light.uni.verse:0 &
If you have sh running on the remote computer:
dark$ DISPLAY=light.uni.verse:0
dark$ export DISPLAY
dark$ xfig &
or, alternatively:
dark$ DISPLAY=light.uni.verse:0 xfig &
or, of course, also:
dark$ xfig -display light.uni.verse:0 &
It seems that some versions of telnet automatically transport the
DISPLAY
variable to the remote host. If you have one of those,
you're lucky, and you don't have to set it by hand. If not, most versions
of telnet do transport the TERM
environment variable; with some
judicious hacking it is possible to piggyback the DISPLAY
variable
on to the TERM
variable.
The idea with piggybacking is that you do some scripting to achieve
the following: before telnetting, attach the value of DISPLAY
to TERM
. Then telnet out. At the remote end, in the applicable
.*shrc
file, read the value of DISPLAY
from TERM
.
The server will not accept connections from just anywhere. You don't want everyone to be able to display windows on your screen. Or read what you type -- remember that your keyboard is part of your display!
Too few people seem to realise that allowing access to your display poses a security risk. Someone with access to your display can read and write your screens, read your keystrokes, and read your mouse actions.
Most servers know two ways of authenticating connections to it: the host list mechanism (xhost) and the magic cookie mechanism (xauth). Then there is ssh, the secure shell, that can forward X connections.
Notice that some X servers (from XFree86) can be configured not to
listen on the usual TCP port with the -nolisten tcp
argument.
Notably the default configuration of Debian GNU/Linux is to disable
the X server listening on the TCP port. If you wish to use remote X
on a Debian system, you should re-enable this by altering the way the X
server is started. Look at /etc/X11/xinit/xserverrc
for a start.
Xhost allows access based on hostnames. The server maintains a list of hosts which are allowed to connect to it. It can also disable host checking entirely. Beware: this means no checks are done, so every host may connect!
You can control the server's host list with the xhost program. To use this mechanism in the previous example, do:
light$ xhost +dark.matt.er
This allows all connections from host dark.matt.er
. As soon as
your X client has made its connection and displays a window, for safety,
revoke permissions for more connections with:
light$ xhost -dark.matt.er
You can disable host checking with:
light$ xhost +
This disables host access checking and thus allows everyone to connect. You should never do this on a network on which you don't trust all users (such as Internet). You can re-enable host checking with:
light$ xhost -
xhost - by itself does not remove all hosts from the access list (that would be quite useless - you wouldn't be able to connect from anywhere, not even your local host).
Xhost is a very insecure mechanism. It does not distinguish between different users on the remote host. Also, hostnames (addresses actually) can be spoofed. This is bad if you're on an untrusted network (for instance already with dialup PPP access to Internet).
Xauth allows access to anyone who knows the right secret. Such a secret is called an authorization record, or a magic cookie. This authorization scheme is formally called MIT-MAGIC-COOKIE-1.
The cookies for different displays are stored together in
~/.Xauthority
. Your ~/.Xauthority
must
be inaccessible for group/other users. The xauth program manages these
cookies, hence the nickname xauth for the scheme.
You can specify a different cookie file with the XAUTHORITY
environment variable, but you will rarely need this. If you're not sure
which cookie file your xauth is using, do an xauth -v
, and it will
tell you.
On starting a session, the server reads a cookie from the file that
is indicated by the -auth
argument. After that, the server only
allows connections from clients that know the same cookie. When the
cookie in ~/.Xauthority
changes, the server will not pick
up the change.
Newer servers can generate cookies on the fly for clients that ask for
it. Cookies are still kept inside the server though; they don't end up
in ~/.Xauthority
unless a client puts them there. According to
David Wiggins:
A further wrinkle was added in X11R6.3 that you may be interested in. Via the new SECURITY extension, the X server itself can generate and return new cookies on the fly. Furthermore, the cookies can be designated ``untrusted'' so that applications making connections with such cookies will be restricted in their operation. For example, they won't be able to steal keyboard/mouse input, or window contents, from other trusted clients. There is a new ``generate'' subcommand to xauth to make this facility at least possible to use, if not easy.
Xauth has a clear security advantage over xhost. You can limit access to specific users on specific computers. It does not suffer from spoofed addresses as xhost does. And if you want to, you can still use xhost next to it to allow connections.
If you want to use xauth, you must start the X server with the -auth
authfile
argument. If you use the startx script, that's the right place
to do it. Create the authorization record as below in your startx script.
Excerpt from /usr/X11R6/bin/startx
:
mcookie|sed -e 's/^/add :0 . /'|xauth -q
xinit -- -auth "$HOME/.Xauthority"
Mcookie is a tiny program in the util-linux package,
primary site
ftp://ftp.math.uio.no/pub/linux/. Alternatively, you
can use md5sum to massage some random data (from, for instance,
/dev/urandom
or ps -axl
) into cookie format:
dd if=/dev/urandom count=1|md5sum|sed -e 's/^/add :0 . /'|xauth -q
xinit -- -auth "$HOME/.Xauthority"
If you can't edit the startx script (because you aren't root), get
your system administrator to set up startx properly, or let him set up
xdm instead. If he can't or won't, you can make a ~/.xserverrc
script. If you have this script, it is run by xinit instead of the real
X server. Then you can start the real X server from this script with the
proper arguments. To do so, have your ~/.xserverrc
use the magic
cookie line above to create a cookie and then exec the real X server:
#!/bin/sh
mcookie|sed -e 's/^/add :0 . /'|xauth -q
exec /usr/X11R6/bin/X "$@" -auth "$HOME/.Xauthority"
If you use xdm to manage your X sessions, you can use
xauth easily. Define the DisplayManager.authDir resource in
/etc/X11/xdm/xdm-config
. Xdm will pass the -auth
argument
to the X server when it starts. When you then log in under xdm, xdm
puts the cookie in your ~/.Xauthority
for you. See xdm(1)
for more information. For instance, my /etc/X11/xdm/xdm-config
has the following line in it:
DisplayManager.authDir: /var/lib/xdm
Now that you have started your X session on the server host
light.uni.verse
and have your cookie in ~/.Xauthority
, you
will have to transfer the cookie to the client host, dark.matt.er
. There are several ways to do this.
The easiest is when your home directories on light and dark are
shared. The ~/.Xauthority
files are the same, so the
cookie is transported instantaneously. However, there's a catch: when
you put a cookie for :0
in ~/.Xauthority
, dark will
think it's a cookie for itself instead of for light. You must use an
explicit host name when you create the cookie; you can't leave it out.
You can install the same cookie for both :0
and light:0
with
this little piece of sed wizardry:
#!/bin/sh
mcookie|sed -e 's/^/add :0 . /' -e p -e "s/:/$HOST&/"|xauth -q
exec /usr/X11R6/bin/X "$@" -auth "$HOME/.Xauthority"
rsh
If the home directories aren't shared, you can transport the cookie by means of rsh, the remote shell:
light$ xauth nlist "${HOST}:0" | rsh dark.matt.er xauth nmerge -
~/.Xauthority
(xauth nlist :0
).
| rsh dark.matt.er
).
~/.Xauthority
there (xauth nmerge -
).
Notice the use of ${HOST}
. You need to transport the cookie that is
explicitly associated with the local host. A remote X application would
interpret a display value of :0
as referring to the remote machine,
which is not what you want!
It's possible that rsh doesn't work for you. Besides that, rsh also has a security drawback (spoofed host names again, if I remember correctly). If you can't or don't want to use rsh, you can also transfer the cookie manually, like:
light$ echo $DISPLAY
:0
light$ xauth list $DISPLAY
light/unix:0 MIT-MAGIC-COOKIE-1 076aaecfd370fd2af6bb9f5550b26926
light$ rlogin dark.matt.er
Password:
dark% setenv DISPLAY light.uni.verse:0
dark% xauth
Using authority file /home/zweije/.Xauthority
xauth> add light.uni.verse:0 . 076aaecfd370fd2af6bb9f5550b26926
xauth> exit
Writing authority file /home/zweije/.Xauthority
dark% xfig &
[15332]
dark% logout
light$
See also rsh(1) and xauth(1x) for more information.
It may be possible to piggyback the cookie on the TERM
or
DISPLAY
variable when you do a telnet to the remote host. This would
go the same way as piggybacking the DISPLAY
variable on the TERM
variable. See section 5: Telling the Client. You're on own here from
my point of view, but I'm interested if anyone can confirm or deny this.
Notice, however, that environment variables can be observed by others on
some unices, and you won't be able to prevent the cookie in $TERM
from showing up if people are looking for it.
An X application on dark.matt.er, such as xfig above, will automatically
look in ~/.Xauthority
there for the cookie to authenticate
itself with.
There's a little wrinkle when using localhost:D
. X client
applications translate localhost:D
into host/unix:D
for
the purpose of cookie retrieval. Effectively, this means that a cookie
for localhost:D
in your ~/.Xauthority
has no effect.
If you think about it, it's only logical. The interpretation of
localhost
depends entirely on the machine on which it's interpreted.
It would give a horrible mess when you have a shared home directory,
such as through NFS, with several hosts all interfering with each
other's cookies.
Authority records are transmitted over the network with no encryption. If you're even worried someone might snoop on your connections, use ssh, the secure shell. It can do X forwarding over encrypted connections.
To turn on X forwarding over ssh, use the command line switch -X
or write the following in your local ssh configuration file:
Host remote.host.name
ForwardX11 yes
The ssh server (sshd
) at the remote end automatically sets
DISPLAY
to point to its end of the X forwarding tunnel. The remote
tunnel end gets its own cookie; the remote ssh server generates it for
you and puts it in ~/.Xauthority
there. So, X authorisation
with ssh is fully automatic.
By the way, ssh is great in other ways too. It's a good structural improvement to your system. For more information, visit http://www.ssh.org/, the ssh home page.
Who knows anything else on authentication schemes or encrypting X connections? Maybe kerberos?
Suppose you want to run a graphical configuration tool that requires root privileges. However, your X session is running under your usual account. It may seem strange at first, but the X server will not allow the tool to access your display. How is this possible when root can normally do anything? And how do you work around this problem?
Let's generalise to the situation where you want to an X appliation
under a user-id clientuser
, but the X session was started
by serveruser
. If you have read the section on cookies,
it is clear why clientuser
cannot access your display:
~clientuser/.Xauthority
does not contain the right magic
cookie for accessing the display. The right cookie is found in
~serveruser/.Xauthority
.
Of course, anything that works for remote X also works for X from
a different user-id as well (particularly slogin localhost -l
clientuser
). It's just that the client host and the server host happen
to be the same. However, when both hosts are the same, there are some
shortcuts for transferring the magic cookie.
We'll assume that you use su
to switch user-ids. Basically, what
you have to do is write a script that will call su
, but wraps the
command that su
executes with some code that does the necessary
things for remote X. These necessary things are setting the DISPLAY
variable and transferring the magic cookie.
Setting DISPLAY
is relatively easy; it just means defining
DISPLAY="$DISPLAY"
before running the su command argument. So you
could just do:
su - clientuser -c "env DISPLAY=$DISPLAY clientprogram &"
This doesn't work yet, because we still have to transfer the cookie.
We can retrieve the cookie using xauth list "$DISPLAY"
. This command
happens to list the cookie in a format that's suitable for feeding back
to the xauth add
command; just what we need!
We shall want to pass the cookie through a pipe. Unfortunately, it
isn't easy to pass something through a pipe to the su
command,
because su
wants to read the password from its standard input.
Fortunately again, in a shell script we can joggle some file descriptors
around, and get it done.
So we write a script around this, parameterizing by clientuser
and clientprogram
. Let's improve the script a little while we're
at it, making it less readable but more robust. It looks like this:
#!/bin/sh
if [ $# -lt 2 ]
then echo "usage: `basename $0` clientuser command" >&2
exit 2
fi
CLIENTUSER="$1"
shift
# FD 4 becomes stdin too
exec 4>&0
xauth list "$DISPLAY" | sed -e 's/^/add /' | {
# FD 3 becomes xauth output
# FD 0 becomes stdin again
# FD 4 is closed
exec 3>&0 0>&4 4>&-
exec su - "$CLIENTUSER" -c \
"xauth -q <&3
exec env DISPLAY='$DISPLAY' "'"$SHELL"'" -c '$*' 3>&-"
}
I think this is portable and works well enough in most circumstances.
The only shortcoming I can think of right now is that, due to using
'$*'
, single quotes in command
will mess up quoting in the
su
command argument ('$*'
). If there's anything else seriously
wrong with it, please drop me an email.
Call the script /usr/local/bin/xsu
, and you can do:
xsu clientuser 'command &'
Can't be much easier, unless you get rid of the password. Yes, there
are ways for that too (sudo
), but this is not the place for that.
The tiny xsu
script just mentioned has served as the basis for a
more extended script called sux
which apparently has found its way
as a package into the
Debian
distribution.
Obviously, anything that works for non-root client users is going to
work for root as well. However, with root you can make it even easier,
because root can read anyone's ~/.Xauthority
file. There's no
need to transfer the cookie. All you have to do is set DISPLAY
, and
point XAUTHORITY
to ~serveruser/.Xauthority
. So you can do:
su - -c "exec env DISPLAY='$DISPLAY' \
XAUTHORITY='${XAUTHORITY-$HOME/.Xauthority}' \
command"
Putting it into a script would give something like:
#!/bin/sh
if [ $# -lt 1 ]
then echo "usage: `basename $0` command" >&2
exit 2
fi
su - -c "exec env DISPLAY='$DISPLAY' \
XAUTHORITY='${XAUTHORITY-$HOME/.Xauthority}' \
"'"$SHELL"'" -c '$*'"
Call the script /usr/local/bin/xroot
, and you can do:
xroot 'control-panel &'
Although, if you've set up xsu
already, there's no real reason to
do this.
A window manager (like twm
, wmaker
, or fvwm95
) is an
application like any other. The normal procedure should work.
Well, almost. At most one window manager can be running on a display at any time. If you are already running a local window manager, you cannot start the remote one (it will complain and exit). You have to kill (or simply quit) the local one first.
Unfortunately, many X session scripts end with an
exec window-manager-of-choice
and this means that when the (local) window manager exits, your session exits, and the X system (xdm or xinit) considers your session over and effectively logs you out.
You have to jump through a few extra hoops, but it can be done and
it's not too difficult. Just play with your session script (normally
~/.xsession
or ~/.xinitrc
) to get it as you want it.
Beware that a window manager often provides ways to run new programs, and that these will run on the local machine. That is, local to where the window manager runs. If you run a remote window manager, it will spawn remote applications, and this may not be what you want. Of course, they still display on the display that is local to you.
Make use of your old PC! Turn it into an extra work place! No need for buying expensive new hardware! You've already got all it takes!
Seriously, you can set up an old PC as an X terminal. An X terminal is a computer that basically runs nothing but an X server. You can log in on it, and get an X session, with xterms, xbiff, xclock, every other conceivable X client. However, all clients are running on a remote host, and are using remote X to display their output on your local X terminal. Even the window manager is running remotely.
An X terminal takes very few resources, compared to a full blown unix machine. Over here I have an X terminal with a 486 CPU, 16M of RAM, and 250M of disk space. Oh, and a network connection, of course. It doesn't even have user home directories.
For some related reading, have a look at:
Contrasted to the above documents, this document (the Remote X Apps mini-HOWTO) limits itself to a short description of XDMCP, but puts more emphasis on the security issues involved.
As far as X is concerned, the X terminal will be running nothing but an X server. This X server will be configured to talk to a remote host using XDMCP (the X Display Manager Control Protocol). It will ask the remote host for an X session. The remote host will put up a login window on the X terminal, and after login it will run an X session with all bells and whistles, including the window manager, all using remote X to display on the X terminal.
You will probably notice that the remote host is acting like a server, though not an X server. The remote host is providing X sessions to X servers that ask for one. So, with respect to XDMCP, the remote host is actually a server, providing X sessions, also known as an XDMCP server. The X server is playing the role of an XDMCP client! Are you still with me?
The program that provides the XDMCP service on the XDMCP server is
xdm
. So, in order to get an X terminal up and running, you must
configure two programs: X
(the XDMCP client) on the X terminal,
and xdm (the XDMCP server) on the remote host.
You must always remember that the X protocol (and the XDMCP protocol) are not encrypted. If you use remote X, everything that goes over the network can be sniffed by other hosts on the network. This is especially bad with remote X sessions, since the first thing that happens is logging in by giving a username and password. So, you must run remote X over a trusted network only!
X
as an XDMCP Client
If you want to set up a Linux machine as an X terminal, you need very few resources. Basically, you need what it takes to get a bare bones Linux machine running, plus an X server. Specifically, you do not need the X clients and libraries. It can be useful to install some X fonts, but you can also use a font server somewhere on the network.
There are a few ways for an X server to get an X session from an XDMCP server. The simplest one is to go straight to a known XDMCP server and ask for one. Alternatively, the X server can broadcast a request for an XDMCP service and use the first XDMCP server that responds. Lastly, the X server can go to an XDMCP server, ask it for a list of hosts willing to provide a session, and let the user choose a session host.
X -query sessionhost
and, assuming xdm
is running on sessionhost
, you'll get a
login window, and after login, an X session.
X -broadcast
and, assuming xdm
is running somewhere on the network, you'll get
a login window from the first (and hopefully quickest) xdm
that
responds, and after login, an X session.
X -indirect xdmcpserver
and, assuming xdm
is configured right there, you'll be presented a
list of hosts to choose from. Choose one; you'll get the login window
for that host, and after login, the session you were looking for.
You may have noticed the absence of the -auth
option. The X
server will use XDMCP to negotiate a magic cookie with the XDMCP server.
The XDMCP server will put the cookie in your remote ~/.Xauthority
after login.
After a session is over, the X server will loop and go back to the
original XDMCP server and ask for another session (or chooser list).
If you don't want that, you can use the -once
option. Note:
this doesn't seem to work with the -indirect
option due to the
implementation of the chooser.
When you have determined the way in which you want to run the
X server, you can also put it in a startup script, or even run
it straight from /etc/inittab
. Please consult your own
distribution's documentation for how to modify your startup scripts
or /etc/inittab
.
Do not run an X server like this from the Xservers
configuration
file. xdm
expects to be able to connect to such servers, and may
kill them if it can't connect.
xdm
as an XDMCP Server
The program that provides the XDMCP service (the session service) is
usually xdm
. There are variants of this such as wdm
or gdm
on Linux, but these basically work the same way. So, make sure xdm
or variant is installed on the host where you want to run your X sessions.
If you've got a local graphical login on the X session host, xdm
is already installed; most Linux distributions come that way these days.
In addition to xdm
, you will need the programs that you wish to be
able to run in an X session. That is, all X clients like xterm
,
xfig
, xclock
, window managers and all that. However, for an
XDMCP server, you do not have to install an X server; the X server
will be running on the X terminal instead.
From the X server story above, you can conclude that there are basically two kinds of XDMCP service. There is the direct service, consisting of letting an XDMCP client log in, and then providing it with an X session. Alternatively, there is the indirect service, in which an XDMCP client is provided with a list of hosts, providing a direct service, to choose from.
All xdm
services are configured in the access file, generally
located at /etc/X11/xdm/Xaccess
or a similar location. This
location is actually defined in the general xdm
configuration file
/etc/X11/xdm/xdm-config
, through the accessFile
resource.
See your xdm
manual for the default location.
If you want to allow xdm
to provide connecting XDMCP clients with an
X session, whether by broadcast or not, you put the host name of the XDMCP
client (the X server, remember?) by itself on a line in Xaccess
.
Actually, you can put a pattern on the line matching multiple hosts.
Here are some valid patterns:
xterm023.my.domain # xterm023.my.domain can get an X session
*.my.domain # any host in my.domain can get an X session
* # any host on Internet can get an X session (unsafe)
Whether you should want to provide any host in Internet with an X session is arguable. Obviously, any service you provide is one more possible hole in your server's security. On the other hand, the server should be secure itself, and an XDMCP client asking for an X session has to provide a valid authentication before the X session is granted.
Furthermore, the X session uses a remote X connection, which is not encrypted. The username/password pair for the login will be transported on this connection. People out there could be sniffing valid username/password combinations, just as with plain telnet connections. This is even worse then having xauth magic cookies sniffed.
Make your own decisions here, but I recommend not enabling this service to the world unless you have a good reason.
If you want to provide XDMCP clients (X -indirect xdmcpserver
) with a
chooser list (a list of hosts to choose from to get an X session), follow
the client pattern with the keyword CHOOSER
and the list of hosts
that that client may choose from. Instead of the list of hosts to choose
from, you can also specify BROADCAST
; with this, xdm
broadcasts
on the network to query for servers willing to provide the session. Some valid examples:
xterm023.my.domain CHOOSER seshost1 seshost2
*.my.domain CHOOSER BROADCAST
* CHOOSER extseshost1 extseshost2
The first lets xterm023
choose between sessions on either
seshost1
and seshost2
. The second lets any host in
my.domain
choose from any host that is willing to provide an
X session. The third lets any host out there choose between a session
on extseshost1
or etsseshost2
.
It is probably not a good idea to do * CHOOSER BROADCAST
. This will
allow hosts outside your network to get information about the hosts inside
your network. You probably don't want to pass out such information.
In fact, allowing a chooser to any outside host is probably not useful
anyway, since you should not be enabling arbitrary direct connections
either.
When you have reconfigured xdm
, send it the HUP
signal to make
it re-read its configuration files.
# kill -HUP pid-of-xdm
#
Technically, as far as I can see, XDMCP is not entirely what you would
expect from the above description. xdm
can redirect connecting X
servers to another place, and uses this trick to implement the chooser.
So, the choosing happens inside xdm, not in the X server, although the
chooser list is represented on the X server's display. This is also
why the X server's -once
option does not combine with -indirect
.
The first time you try to run a remote X application, it usually does not work. Here are a few common error messages, their probable causes, and solutions to help you on your way.
xterm Xt error: Can't open display:
There is no DISPLAY
variable in the environment, and you didn't
tell the application with the -display
flag either. The application
assumes the empty string, but that is syntactically invalid. To solve
this, be sure that you set the DISPLAY
variable correctly in the
environment (with setenv
or export
depending on your shell).
_X11TransSocketINETConnect: Can't connect: errno = 101
xterm Xt error: Can't open display: love.dial.xs4all.nl:0
Errno 101 is ``Network is unreachable''. The application could not make
a network connection to the server. Check that you have the correct
DISPLAY
set, and that the server machine is reachable from your
client (it should be, after all you're probably logged in to the server
and telnetting to the client).
_X11TransSocketINETConnect: Can't connect: errno = 111
xterm Xt error: Can't open display: love.dial.xs4all.nl:0
Errno 111 is ``Connection refused''. The server machine you're trying to connect to is reachable, but the indicated server does not exist there. Check that you are using the right host name and the right display number.
Alternatively, it is possible that the X server was configured not
to listen to the usual TCP port. To find out if this is the case,
see if the X server is started with the -nolisten tcp
argument,
and if so, remove it.
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
xterm Xt error: Can't open display: love.dial.xs4all.nl:0.0
The client could make a connection to the server, but the server does not allow the client to use it (not authorized). Make sure that you have transported the correct magic cookie to the client, and that it has not expired (the server uses a new cookie when a new session starts).