Building and Installing Software Packages for Linux

Mendel Cooper --- http://personal.riverusers.com/~thegrendel/

v1.91, 27 July 1999

This is a comprehensive guide to building and installing "generic" UNIX software distributions under Linux. Additionally, there is some coverage of "rpm" and "deb" pre-packaged binaries.

1. Introduction

2. Unpacking the Files

3. Using Make

4. Prepackaged Binaries

5. Termcap and Terminfo Issues

6. Backward Compatibility With a.out Binaries

7. Troubleshooting

8. Final Steps

9. First Example: Xscrabble

10. Second Example: Xloadimage

11. Third Example: Fortune

12. Fourth Example: Hearts

13. Fifth Example: XmDipmon

14. Where to Find Source Archives

15. Final Words

16. References and Further Reading

17. Credits

1. Introduction

Many software packages for the various flavors of UNIX and Linux come as compressed archives of source files. The same package may be "built" to run on different target machines, and this saves the author of the software from having to produce multiple versions. A single distribution of a software package may thus end up running, in various incarnations, on an Intel box, a DEC Alpha, a RISC workstation, or even a mainframe. Unfortunately, this puts the responsibility of actually "building" and installing the software on the end user, the de facto "system administrator", the fellow sitting at the keyboard -- you. Take heart, though, the process is not nearly as terrifying or mysterious as it seems, as this guide will demonstrate.

2. Unpacking the Files

You have downloaded or otherwise acquired a software package. Most likely it is archived (tarred) and compressed (gzipped), in .tar.gz or .tgz form (familiarly known as a "tarball"). First copy it to a working directory. Then untar and gunzip it. The appropriate command for this is tar xzvf filename, where filename is the name of the software file, of course. The de-archiving process will usually install the appropriate files in subdirectories it will create. Note that if the package name has a .Z suffix, then the above procedure will serve just as well, though running uncompress, followed by a tar xvf also works. You may preview this process by a tar tzvf filename, which lists the files in the archive without actually unpacking them.

The above method of unpacking "tarballs" is equivalent to either of the following:

(The '-' causes the tar command to take its input from stdin.)

Source files in the new bzip2 (.bz2) format can be unarchived by a bzip2 -cd filename | tar xvf -, or, more simply by a tar xyvf filename, assuming that tar has been appropriately patched (refer to the Bzip2 HOWTO for details). Debian Linux uses a different patch for tar, one written by Hiroshi Takekawa, so that the -I, --bzip2, --bunzip2 options work with that particular tar version.

[Many thanks to R. Brock Lynn and Fabrizio Stefani for corrections and updates on the above information.]

Sometimes the archived file must be untarred and installed from the user's home directory, or perhaps in a certain other directory, such as /, /usr/src, or /opt, as specified in the package's config info. Should you get an error message attempting to untar it, this may be the reason. Read the package docs, especially the README and/or Install files, if present, and edit the config files and/or Makefiles as necessary, consistent with the installation instructions. Note that you would not ordinarily alter the Imake file, since this could have unforseen consequences. Most software packages permit automating this process by running make install to emplace the binaries in the appropriate system areas.

Occasionally, you may need to update or incorporate bug fixes into the unarchived source files using a patch or diff file that lists the changes. The doc files and/or README file will inform you should this be the case. The normal syntax for invoking Larry Wall's powerful patch utility is patch < patchfile.

You may now proceed to the build stage of the process.

3. Using Make

The Makefile is the key to the build process. In its simplest form, a Makefile is a script for compiling or building the "binaries", the executable portions of a package. The Makefile can also provide a means of updating a software package without having to recompile every single source file in it, but that is a different story (or a different article).

At some point, the Makefile launches cc or gcc. This is actually a preprocessor, a C (or C++) compiler, and a linker, invoked in that order. This process converts the source into the binaries, the actual executables.

Invoking make usually involves just typing make. This generally builds all the necessary executable files for the package in question. However, make can also do other tasks, such as installing the files in their proper directories (make install) and removing stale object files (make clean). Running make -n permits previewing the build process, as it prints out all the commands that would be triggered by a make, without actually executing them.

Only the simplest software uses a generic Makefile. More complex installations require tailoring the Makefile according to the location of libraries, include files, and resources on your particular machine. This is especially the case when the build needs the X11 libraries to install. Imake and xmkmf accomplish this task.

An Imakefile is, to quote the man page, a "template" Makefile. The imake utility constructs a Makefile appropriate for your system from the Imakefile. In almost all cases, however, you would run xmkmf, a shell script that invokes imake, a front end for it. Check the README or INSTALL file included in the software archive for specific instructions. (If, after dearchiving the source files, there is an Imake file present in the base directory, this is a dead giveaway that xmkmf should be run.) Read the Imake and xmkmf man pages for a more detailed analysis of the procedure.

Be aware that xmkmf and make may need to be invoked as root, especially when doing a make install to move the binaries over to the /usr/bin or /usr/local/bin directories. Using make as an ordinary user without root privileges will likely result in write access denied error messages because you lack write permission to system directories. Check also that the binaries created have the proper execute permissions for you and any other appropriate users.

Invoking xmkmf uses the Imake file to build a new Makefile appropriate for your system. You would normally invoke xmkmf with the -a argument, to automatically do a make Makefiles, make includes, and make depend. This sets the variables and defines the library locations for the compiler and linker. Sometimes, there will be no Imake file, instead there will be an INSTALL or configure script that will accomplish this purpose. Note that if you run configure, it should be invoked as ./configure to ensure that the correct configure script in the current directory is called. In most cases, the README file included with the distribution will explain the install procedure.

It is usually a good idea to visually inspect the Makefile that xmkmf or one of the install scripts builds. The Makefile will normally be correct for your system, but you may occasionally be required to "tweak" it or correct errors manually.

Installing the freshly built binaries into the appropriate system directories is usually a matter of running make install as root. The usual directories for system-wide binaries on modern Linux distributions are /usr/bin, /usr/X11R6/bin, and /usr/local/bin. The preferred directory for new packages is /usr/local/bin, as this will keep separate binaries not part of the original Linux installation.

Packages originally targeted for commercial versions of UNIX may attempt to install in the /opt or other unfamiliar directory. This will, of course, result in an installation error if the intended installation directory does not exist. The simplest way to deal with this is to create, as root, an /opt directory, let the package install there, then add that directory to the PATH environmental variable. Alternatively, you may create symbolic links to the /usr/local/bin directory.

Your general installation procedure will therefore be:

Notes:

4. Prepackaged Binaries

4.1 Whats wrong with rpms?

Manually building and installing packages from source is apparently so daunting a task for some Linux users that they have embraced the popular rpm and deb or the newer Stampede slp package formats. While it may be the case that an rpm install normally runs as smoothly and as fast as a software install in a certain other notorious operating system, some thought should certainly be given to the disadvantages of self-installing, prepackaged binaries.

First, be aware that software packages are normally released first as "tarballs", and that prepackaged binaries follow days, weeks, even months later. A current rpm package is typically at least a couple of minor version behind the latest "tarball". So, if you wish to keep up with all the 'bleeding edge' software, you might not wish to wait for an rpm or deb to appear. Some less popular packages may never be rpm'ed.

Second, the "tarball" package may well be more complete, have more options, and lend itself better to customization and tweaking. The binary rpm version may be missing some of the functionality of the full release. Source rpm's contain the full source code and are equivalent to the corresponding "tarballs", and they likewise need to be built and installed using either of the rpm --recompile packagename.rpm or rpm --rebuild packagename.rpm options.

Third, some prepackaged binaries will not properly install, and even if they do install, they could crash and core-dump. They may depend on different library versions than are present in your system, or they may be improperly prepared or just plain broken. In any case, when installing an rpm or deb you necessarily trust the expertise of the persons who have packaged it.

Finally, it helps to have the source code on hand, to be able to tinker with and learn from it. It is much more straightforward to have the source in the archive you are building the binaries from, and not in a separate source rpm.

Installing an rpm package is not necessarily a no-brainer. If there is a dependency conflict, an rpm install will fail. Likewise, should the rpm require a different version of libraries than the ones present on your system, the install may not work, even if you create symbolic links to the missing libraries from the ones in place. Despite their convenience, rpm installs often fail for the same reasons "tarball" ones do.

You must install rpm's and deb's as root, in order to have the necessary write permissions, and this opens a potentially serious security hole, as you may inadvertently clobber system binaries and libraries, or even install a Trojan horse that might wreak havoc upon your system. It is therefore important to obtain rpm and deb packages from a "trusted source". In any case, you should run a 'signature check' (against the MD5 checksum) on the package, rpm --checksig packagename.rpm, before installing. Likewise highly recommended is running rpm -K --nopgp packagename.rpm. The corresponding commands for deb packages are dpkg -I | --info packagename.deb and dpkg -e | --control packagename.deb.

For the truly paranoid (and, in this case there is much to be said for paranoia), there are the unrpm and rpmunpack utilities available from the Sunsite utils/package directory for unpacking and checking the individual components of the packages.

Klee Diene has written an experimental dpkgcert package for verifying the integrity of installed .deb files against MD5 checksums. It is available from the Debian ftp archive. The current package name / version is dpkgcert_0.2-4.1_all.deb. The Jim Pick Software site maintains an experimental server database to provide dpkgcert certificates for the packages in a typical Debian installation.

In their most simple form, the commands rpm -i packagename.rpm and dpkg --install packagename.deb automatically unpack and install the software. Exercise caution, though, since using these commands blindly may be dangerous to your system's health!

Note that the above warnings also apply, though to a lesser extent, to Slackware's pkgtool installation utility. All "automatic" software installations require caution.

The martian and alien programs allow conversion between the rpm, deb, Stampede slp, and tar.gz package formats. This makes these packages accessible to all Linux distributions.

Carefully read the man pages for the rpm and dpkg commands, and refer to the RPM HOWTO, TFUG's Quick Guide to Red Hat's Package Manager, and The Debian Package Management Tools for more detailed information.

4.2 Problems with rpms: an example

Jan Hubicka wrote a very nice fractal package called xaos. At his home page, both .tar.gz and rpm packages are available. For the sake of convenience, let us try the rpm version, rather than the "tarball".

Unfortunately, the rpm of xaos fails to install. Two separate rpm versions misbehave.

rpm -i --test XaoS-3.0-1.i386.rpm 

error: failed dependencies:
        libslang.so.0 is needed by XaoS-3.0-1
        libpng.so.0 is needed by XaoS-3.0-1
        libaa.so.1 is needed by XaoS-3.0-1

rpm -i --test xaos-3.0-8.i386.rpm 

error: failed dependencies:
        libaa.so.1 is needed by xaos-3.0-8

The strange thing is that libslang.so.0, libpng.so.0, and libaa.so.1 are all present in /usr/lib on the system tested. The rpms of xaos must have been built with slightly different versions of those libraries, even if the release numbers are identical.

As a test, let us try installing xaos-3.0-8.i386.rpm with the --nodeps option to force the install. A trial run of xaos crashes. 

xaos: error in loading shared libraries: xaos: undefined symbol: __fabsl

Let us stubbornly try to get to the bottom of this. Running ldd on the xaos binary to find its library dependencies shows all the necessary shared libraries present. Running nm on the /usr/lib/libaa.so.1 library to list its symbolic references shows that it is indeed missing __fabsl. Of course, the absent reference could be missing from one of the other libraries... There is nothing to be done about that, short of replacing one or more libraries.

Enough! Download the "tarball", XaoS-3.0.tar.gz, available from the ftp site, as well as from the home page. Try building it. Running ./configure, make, and finally (as root) make install, works flawlessly.

This is one of an number of examples of prepackaged binaries being more trouble than they are worth.

5. Termcap and Terminfo Issues

According to its man page, "terminfo is a data base describing terminals, used by screen-oriented programs...". It defines a generic set of control sequences (escape codes) used to display text on terminals, and makes possible support for different terminal hardware without the need for special drivers. The terminfo libraries are located in /usr/share/terminfo on modern Linux distributions.

The terminfo database has largely supplanted the older termcap and the totally obsolete termlib ones. This is usually of no concern for program installation except when dealing with a package that requires termcap.

Most Linux distributions now use terminfo, but still retain the older termcap libraries for compatibility with legacy applications (see /etc/termcap). Sometimes there is a special compatibility package that needs to be installed to facilitate use of termcap linked binaries. Very occasionally, an #define termcap statement might need to be commented out of a source file. Check the appropriate doc files for your particular distribution for definitive information on this.

6. Backward Compatibility With a.out Binaries

In a very few cases, it is necessary to use a.out binaries, either because the source code is not available or because it is not possible to build new ELF binaries from the source for some reason.

As it happens, ELF installations almost always have a complete set of a.out libraries in the /usr/i486-linuxaout/lib directory. The numbering scheme for a.out libraries differs from that of ELF ones, cleverly avoiding conflicts that could cause confusion. The a.out binaries should therefore be able to find the correct libraries at runtime, but this might not always be the case.

Note that the kernel needs to have a.out support built into it, either directly or as a loadable module. It may be necessary to rebuild the kernel to enable this. Moreover, some Linux distributions require installation of a special compatibility package, such as Debian's xcompat for executing a.out X applications.

6.1 An Example

Jerry Smith wrote a very handy rolodex program some years back. It uses the Motif libraries, but fortunately is available as a statically linked binary in a.out format. Unfortunately, the source requires numerous tweaks to rebuild using the lesstif libraries. Even more unfortunately, the a.out binary bombs on an ELF system with the following error message. 

xrolodex: can't load library '//lib/libX11.so.3'
No such library

As it happens, there is such a library, in /usr/i486-linuxaout/lib, but xrolodex is unable to locate it at run time. The simple solution is to provide a symbolic link in the /lib directory:

ln -s /usr/i486-linuxaout/lib/X11.so.3.1.0 libX11.so.3

It turns out to be necessary to provide similar links for the libXt.so.3 and libc.so.4 libraries. This needs to be done as root, of course. Note that you should make absolutely certain you will not overwrite or cause version number conflicts with pre-existing libraries. Fortunately, the new ELF libraries have higher version numbers than the older a.out ones, to anticipate and forestall just such problems.

After creating the three links, xrolodex runs fine.

The xrolodex package was originally posted on Spectro, but seems to vanished from there. It may currently be downloaded from Sunsite as a tar.Z format source file [512k].

7. Troubleshooting

If xmkmf and/or make succeeded without errors, you may proceed to the next section. However, in "real life", few things work right the first time. This is when your resourcefulness is put to the test.

7.1 Link Errors

7.2 Other Problems

7.3 Tweaking and fine tuning

You may wish to examine the Makefile to make certain that the best compilation options for your system are invoked. For example, setting the -O2 flag chooses the highest level of optimization and the -fomit-frame-pointer flag results in a smaller binary (though debugging will then be disabled). Do not play around with this unless you know what you are doing, and in any case, not until after a trial build works.

7.4 Where to go for more help

In my experience, perhaps 25% of applications build "right out of the box". Another 50% or so can be "persuaded" to build with an effort ranging from trivial to herculean. That still means a significant number of packages will not build no matter what. Even then, the Intel ELF and/or a.out binaries for these might possibly be found at Sunsite or the TSX-11 archive. Red Hat and Debian have extensive archives of prepackaged binaries of most of the popular Linux software. Perhaps the author of the software can supply the binaries compiled for your particular flavor of machine.

Note that if you obtain precompiled binaries, you will need to check for compatibility with your system:

If all else fails, you may find help in the appropriate newsgroups, such as comp.os.linux.x or comp.os.linux.development.

If nothing at all works, at least you gave it your best effort, and you learned a lot.

8. Final Steps

Read the software package documentation to determine whether certain environmental variables need setting (in .bashrc or .cshrc) and if the .Xdefaults and .Xresources files need customizing.

There may be an applications default file, usually named Xfoo.ad in the original Xfoo distribution. If so, edit the Xfoo.ad file to customize it for your machine, then rename (mv) it Xfoo and install it in the /usr/lib/X11/app-defaults directory, as root. Failure to do this may cause the software to behave strangely or even refuse to run.

Most software packages come with one or more preformatted man pages. As root, copy the Xfoo.man file to the appropriate /usr/man, /usr/local/man, or /usr/X11R6/man directory (man1 - man9), and rename it accordingly. For example, if Xfoo.man ends up in /usr/man/man4, it should be renamed Xfoo.4 (mv Xfoo.man Xfoo.4). By convention, user commands go in man1, games in man6, and administration packages in man8 (see the man docs for more details). Of course, you may deviate from this on your own system, if you like.

A few packages will not install the binaries in the appropriate system directories, that is, they are missing the install option in the Makefile. Should this be the case, you can install the binaries manually by copying the binaries to the appropriate system directory, /usr/bin, /usr/local/bin or /usr/X11R6/bin, as root, of course. Note that /usr/local/bin is the preferred directory for binaries that are not part of the Linux distribution's base install.

Some or all of the above procedures should, in most cases, be handled automatically by a make install, and possibly a make install.man or make install_man. If so, the README or INSTALL doc file will specify this.

9. First Example: Xscrabble

Matt Chapman's Xscrabble seemed like a program that would be interesting to have, since I happen to be an avid ScrabbleTM player. I downloaded it, uncompressed it, and built it following the procedure in the README file: 

     xmkmf
     make Makefiles
     make includes
     make

Of course it did not work... 

gcc -o xscrab -O2 -O -L/usr/X11R6/lib 
init.o xinit.o misc.o moves.o cmove.o main.o xutils.o mess.o popup.o
widgets.o display.o user.o CircPerc.o
-lXaw -lXmu -lXExExt -lXext -lX11 -lXt -lSM -lICE -lXExExt -lXext -lX11
-lXpm -L../Xc -lXc

BarGraf.o(.text+0xe7): undefined reference to `XtAddConverter'
BarGraf.o(.text+0x29a): undefined reference to `XSetClipMask'
BarGraf.o(.text+0x2ff): undefined reference to `XSetClipRectangles'
BarGraf.o(.text+0x375): undefined reference to `XDrawString'
BarGraf.o(.text+0x3e7): undefined reference to `XDrawLine'
etc.
etc.
etc...

I enquired about this in the comp.os.linux.x newsgroup, and someone kindly pointed out that apparently the Xt, Xaw, Xmu, and X11 libs were not being found at the link stage. Hmmm...

There were two main Makefiles, and the one in the src directory caught my interest. One line in the Makefile defined LOCAL_LIBS as: LOCAL_LIBS = $(XAWLIB) $(XMULIB) $(XTOOLLIB) $(XLIB) Here were references to the libs not being found by the linker.

Looking for the next reference to LOCAL_LIBS, I saw on line 495 of that Makefile: 

      $(CCLINK) -o $@ $(LDOPTIONS) $(OBJS) $(LOCAL_LIBS) $(LDLIBS)
$(EXTRA_LOAD_FLAGS)

Now what were these LDLIBS? 

      LDLIBS = $(LDPOSTLIB) $(THREADS_LIBS) $(SYS_LIBRARIES)
$(EXTRA_LIBRARIES)

The SYS_LIBRARIES were: 

 SYS_LIBRARIES = -lXpm -L../Xc -lXc
Yes! Here were the missing libraries.

Possibly the linker needed to see the LDLIBS before the LOCAL_LIBS... So, the first thing to try was to modify the Makefile by transposing the $(LOCAL_LIBS) and $(LDLIBS) on line 495, so it would now read: 

        $(CCLINK) -o $@ $(LDOPTIONS) $(OBJS) $(LDLIBS) $(LOCAL_LIBS)
$(EXTRA_LOAD_FLAGS)                          ^^^^^^^^^^^^^^^^^^^^^^^

I tried running make again with the above change, and lo and behold, it worked this time. Of course, Xscrabble still needed some fine tuning and twiddling, such as renaming the dictionary and commenting out some assert statements in one of the source files, but since then it has provided me with many hours of pleasure.

[Note that a newer version of Xscrabble is now available in rpm format, and this installs without problems.]

You may e-mail Matt Chapman, and download Xscrabble from his home page. 

       Scrabble is a registered trademark of the Milton Bradley Co., Inc.

10. Second Example: Xloadimage

This example poses an easier problem. The xloadimage program seemed a useful addition to my set of graphic tools. I copied the xloadi41.gz file directly from the source directory on the CD included with the excellent X User Tools book, by Mui and Quercia. As expected, tar xzvf unarchives the files. The make, however, produces a nasty-looking error and terminates. 

gcc -c -O -fstrength-reduce -finline-functions -fforce-mem
-fforce-addr -DSYSV  -I/usr/X11R6/include
-DSYSPATHFILE=\"/usr/lib/X11/Xloadimage\" mcidas.c

In file included from /usr/include/stdlib.h:32,
                 from image.h:23,
                 from xloadimage.h:15,
                 from mcidas.c:7:
/usr/lib/gcc-lib/i486-linux/2.6.3/include/stddef.h:215:
conflicting types for `wchar_t'
/usr/X11R6/include/X11/Xlib.h:74: previous declaration of
`wchar_t'
make[1]: *** [mcidas.o] Error 1
make[1]: Leaving directory
`/home/thegrendel/tst/xloadimage.4.1'
make: *** [default] Error 2

The error message contains the essential clue.

Looking at the file image.h, line 23... 

       #include <stdlib.h>

Aha, somewhere in the source for xloadimage, wchar_t has been redefined from what was specified in the standard include file, stdlib.h. Let us first try commenting out line 23 in image.h, as perhaps the stdlib.h include is not, after all, necessary.

At this point, the build proceeds without any fatal errors. The xloadimage package functions correctly now.

11. Third Example: Fortune

This example requires some knowledge of C programming. The majority of UNIX/Linux software is written in C, and learning at least a little bit of C would certainly be an asset for anyone serious about software installation.

The notorious fortune program displays up a humorous saying, a "fortune cookie", every time Linux boots up. Unfortunately (pun intended), attempting to build fortune on a Red Hat distribution with a 2.0.30 kernel generates fatal errors. 

~/fortune# make all


gcc -O2 -Wall -fomit-frame-pointer -pipe   -c fortune.c -o
fortune.o
fortune.c: In function `add_dir':
fortune.c:551: structure has no member named `d_namlen'
fortune.c:553: structure has no member named `d_namlen'
make[1]: *** [fortune.o] Error 1
make[1]: Leaving directory `/home/thegrendel/for/fortune/fortune'
make: *** [fortune-bin] Error 2

Looking at fortune.c, the pertinent lines are these. 

   if (dirent->d_namlen == 0)
            continue;
        name = copy(dirent->d_name, dirent->d_namlen);

We need to find the structure dirent, but it is not declared in the fortune.c file, nor does a grep dirent show it in any of the other source files. However, at the top of fortune.c, there is the following line. 

#include <dirent.h>

This appears to be a system library include file, therefore, the logical place to look for dirent.h is in /usr/include. Indeed, there does exist a dirent.h file in /usr/include, but that file does not contain the declaration of the dirent structure. There is, however, a reference to another dirent.h file. 

#include <linux/dirent.h>

At last, going to /usr/include/linux/dirent.h, we find the structure declaration we need. 

struct dirent {
        long            d_ino;
        __kernel_off_t  d_off;
        unsigned short  d_reclen;
        char            d_name[256]; /* We must not include
limits.h! */
};

Sure enough, the structure declaration contains no d_namelen, but there are a couple of "candidates" for its equivalent. The most likely of these is d_reclen, since this structure member probably represents the length of something and it is a short integer. The other possibility, d_ino, could be an inode number, judging by its name and type. As a matter of fact, we are probably dealing with a "directory entry" structure, and these elements represent attributes of a file, its name, inode, and length (in blocks). This would seem to validate our guess.

Let us edit the file fortune.c, and change the two d_namelen references in lines 551 and 553 to d_reclen. Try a make all again. Success. It builds without errors. We can now get our "cheap thrills" from fortune.

12. Fourth Example: Hearts

Here is the hoary old game of Hearts, written for UNIX systems by Bob Ankeney sometime in the '80's, revised in 1992 by Mike Yang, and currently maintained by Jonathan Badger. Its predecessor was an even older Pascal program by Don Backus of Oregon Software, later updated by Jeff Hemmerling. Originally intended as a multiplayer client, it also works well in single-player mode against computer opponents. The graphics are nice, though the game lacks sophisticated features and the computer players are not particularly strong. All the same, it seems to be the only decent Hearts game available for UNIX and Linux machines even at this late date.

Due to its age and lineage, this package is particularly difficult to build on a Linux system. It requires solving a long and perplexing series of puzzles. It is an exercise in patience and determination.

Before beginning, make certain that you have either the motif or lesstif libraries installed.

xmkmf

make 

client.c: In function `read_card':
client.c:430: `_tty' undeclared (first use in this function)
client.c:430: (Each undeclared identifier is reported only once
client.c:430: for each function it appears in.)
client.c: In function `scan':
client.c:685: `_tty' undeclared (first use in this function)
make: *** [client.o] Error 1

These are the culprits in the file client.c: 

#ifndef SYSV
        (buf[2] != _tty.sg_erase) && (buf[2] != _tty.sg_kill)) {
 #else
        (buf[2] != CERASE) && (buf[2] != CKILL)) {
#endif

In client.c, add 

#define SYSV
at line 39. This will bypass the reference to _tty.

make 

client.c:41: sys/termio.h: No such file or directory
make: *** [client.o] Error 1

The include file termio.h is in the /usr/include directory on a Linux system, rather than the /usr/include/sys one, as was the case on older UNIX machines. Therefore, change line 41 of client.c from 

#include <sys/termio.h>
to 
#include <termio.h>

make 

gcc -o hearts -g      -L/usr/X11R6/lib client.o hearts.o select.o connect.o
sockio.o start_dist.o  -lcurses -ltermlib       
/usr/bin/ld: cannot open -ltermlib: No such file or directory
collect2: ld returned 1 exit status
make: *** [hearts] Error 1

Modern Linux distributions use the terminfo and/or termcap database, rather than the obsolete termlib one.

Edit the Makefile.

Line 655: 

CURSES_LIBRARIES = -lcurses -ltermlib

changes to: 

CURSES_LIBRARIES = -lcurses -ltermcap

make 

gcc -o xmhearts -g      -L/usr/X11R6/lib xmclient.o hearts.o select.o
connect.o sockio.o start_dist.o gfx.o  -lXm_s -lXt -lSM -lICE -lXext -lX11
-lPW       
/usr/bin/ld: cannot open -lXm_s: No such file or directory
collect2: ld returned 1 exit status

The main lesstif library is libXm, rather than libXm_s. Therefore, edit the Makefile.

In line 653: 

XMLIB = -lXm_s $(XTOOLLIB) $(XLIB) -lPW

changes to: 

XMLIB = -lXm $(XTOOLLIB) $(XLIB) -lPW

make 

gcc -o xmhearts -g      -L/usr/X11R6/lib xmclient.o hearts.o select.o
connect.o sockio.o start_dist.o gfx.o  -lXm -lXt -lSM -lICE -lXext -lX11 -lPW       
/usr/bin/ld: cannot open -lPW: No such file or directory
collect2: ld returned 1 exit status
make: *** [xmhearts] Error 1

Round up the usual suspects.

There is no PW library. Edit the Makefile.

Line 653: 

XMLIB = -lXm $(XTOOLLIB) $(XLIB) -lPW

changes to: 

XMLIB = -lXm $(XTOOLLIB) $(XLIB) -lPEX5
(The PEX5 lib comes closest to PW.)

make 

rm -f xmhearts
gcc -o xmhearts -g      -L/usr/X11R6/lib xmclient.o hearts.o select.o
connect.o sockio.o start_dist.o gfx.o  -lXm -lXt -lSM -lICE -lXext -lX11 -lPEX5

The make finally works (hurray!).

Installation:

As root, 

[root@localhost hearts]# make install
install -c -s  hearts /usr/X11R6/bin/hearts
install -c -s  xmhearts /usr/X11R6/bin/xmhearts
install -c -s  xawhearts /usr/X11R6/bin/xawhearts
install in . done

Test run:

rehash

(We're running the tcsh shell.)

xmhearts 

localhost:~/% xmhearts
Can't invoke distributor!

From README file in the hearts package: 

     Put heartsd, hearts_dist, and hearts.instr in the HEARTSLIB
     directory defined in local.h and make them world-accessible.

From the file local.h: 

/* where the distributor, dealer and instructions live */

#define HEARTSLIB "/usr/local/lib/hearts"

This is a classic case of RTFM.

As root,

cd /usr/local/lib

mkdir hearts

cd !$

Copy the distributor files to this directory.

cp /home/username/hearts/heartsd .

cp /home/username/hearts/hearts_dist .

cp /home/username/hearts/hearts.instr .

Try another test run.

xmhearts

It works some of the time, but more often than not crashes with a dealer died! message.

The "distributor" and "dealer" scan the hardware ports. We should thus suspect that those programs need root user privileges.

Try, as root,

chmod u+s /usr/local/lib/heartsd

chmod u+s /usr/local/lib/hearts_dist

(Note that, as previously discussed, suid binaries may create security holes.)

xmhearts

It finally works!

Hearts is available from Sunsite.

13. Fifth Example: XmDipmon

Bullwinkle: Hey Rocky, watch me pull a rabbit out of my hat.
Rocky:      But that trick never works.
Bullwinkle: This time for sure.
            Presto!
            Well, I'm gettin' close.
Rocky:      And now it's time for another special feature.
            --- "Rocky and His Friends"

XmDipmon is a nifty little application that displays a button showing the status of an Internet connection. It flashes and beeps when the connection is broken, as is all too often the case in on rural telephone systems. Unfortunately, XmDipmon works only with dip, making it useless for those people, the majority, who use chat to connect.

Building XmDipmon is not a problem. XmDipmon links to the Motif libraries, but it builds and works fine with Lesstif. The challenge is to alter the package to work when using chat. This involves actually tinkering with the source code, and necessarily requires some programming knowledge. 

        "When xmdipmon starts up, it checks for a file called /etc/dip.pid
         (you can let it look at another file by using the -pidfile
         command line option).  This file contains the PID of the dip
         deamon (dip switches itself into deamon mode once it has
         established a connection)."
                       --- from the XmDipmon README file

Using the -pidfile option, the program can be directed to check for a different file upon startup, one that exists only during a successful chat login. The obvious candidate is the modem lock file. We could therefore try invoking the program with xmdipmon -pidfile /var/lock/LCK..ttyS3 (this assumes that the modem is on com port #4, ttyS3). This only solves part of the problem, however. The program continually monitors the dip daemon, and we need to change this so it instead polls a process associated with chat or ppp.

There is only a single source file, and fortunately it is well-commented. Scanning the xmdipmon.c file, we find the getProcFile function, whose header description reads as follows. 

/*****
* Name:                 getProcFile
* Return Type:  Boolean
* Description:  tries to open the /proc entry as read from the dip pid file.
<snip>
*****/

We are hot on the trail now. Tracing into the body of the function... 

                        /* we watch the status of the real dip deamon */
                        sprintf(buf, "/proc/%i/status", pid);
                        procfile = (String)XtMalloc(strlen(buf)*sizeof(char)+1);
                        strcpy(procfile, buf);
                        procfile[strlen(buf)] = '\0';

The culprit is line 2383: 

                        sprintf(buf, "/proc/%i/status", pid);
                                      ^^^^^^^^^^^^^^^^^^^^^

This checks whether the dip daemon process is running . So, how can we change this to monitor the pppd daemon instead?

Looking at the pppd manpage: 

FILES
       /var/run/pppn.pid (BSD or Linux), /etc/ppp/pppn.pid (others)
                     Process-ID for pppd process on ppp interface unit n.

Change line 2383 in xmdipmon.c to: 

                        sprintf(buf, "/var/run/ppp0.pid" );

Rebuild the revised package. No problems with the build. Now test it with the new command line argument. It works like a charm. The little blue button indicates when a ppp connection to the ISP has been established, and flashes and beeps when the connection is broken. Now we have a fully functional chat monitor.

XmDipmon can be downloaded from Ripley Linux Tools.

14. Where to Find Source Archives

Now that you are eager to use your newly acquired knowledge to add utilities and other goodies to your system, you may find them online at the Linux Applications and Utilities Page, or on one of the very reasonably priced CD ROM archives by Red Hat, InfoMagic, Linux Systems Labs, Cheap Bytes, and others.

A comprehensive repository of source code is the comp sources UNIX archive.

Much UNIX source code is posted on the alt.sources newsgroup. If you are looking for particular source code packages, you may post on the related alt.sources.wanted newsgroup. Another good place to check is the comp.os.linux.announce newsgroup. To get on the Unix sources mailing list, send a subscribe message there.

Archives for the alt.sources newsgroup are at the following ftp sites:

15. Final Words

To sum up, persistence makes all the difference (and a high frustration threshold certainly helps). As in all endeavors, learning from mistakes is critically important. Each misstep, every failure contributes to the body of knowledge that will lead to mastery of the art of building software.

16. References and Further Reading

BORLAND C++ TOOLS AND UTILITIES GUIDE, Borland International, 1992,
pp. 9-42.
[One of the manuals distributed with Borland C++, ver. 3.1. Gives
a fairly good intro to make syntax and concepts, using Borland's
crippled implementation for DOS.]

DuBois, Paul: SOFTWARE PORTABILITY WITH IMAKE, O'Reilly and Associates,
1996, ISBN 1-56592-226-3.
[This is reputed to be the definitive imake reference, though I did not
have it available when writing this article.]

Frisch, Aeleen: ESSENTIAL SYSTEM ADMINISTRATION (2nd ed.), O'Reilly and
Associates, 1995, ISBN 1-56592-127-5.
[This otherwise excellent sys admin handbook has only sketchy coverage
of software building.]

Hekman, Jessica: LINUX IN A NUTSHELL, O'Reilly and Associates, 1997, ISBN
1-56592-167-4.
[Good all-around reference to Linux commands.]

Lehey, Greg: PORTING UNIX SOFTWARE, O'Reilly and Associates, 1995, ISBN
1-56592-126-7.

Mayer, Herbert G.: ADVANCED C PROGRAMMING ON THE IBM PC, Windcrest Books,
1989, ISBN 0-8306-9363-7.
[An idea-filled book for the intermediate to advanced C programmer.
Superb coverage of algorithms, quirks of the language, and even
amusements.  Unfortunately, out of print.]

Mui, Linda and Valerie Quercia: X USER TOOLS, O'Reilly and Associates,
1994, ISBN 1-56592-019-8, pp. 734-760.

Oram, Andrew and Steve Talbott: MANAGING PROJECTS WITH MAKE, O'Reilly
and Associates, 1991, ISBN 0-937175-90-0.

Peek, Jerry and Tim O'Reilly and Mike Loukides: UNIX POWER TOOLS,
O'Reilly and Associates / Random House, 1997, ISBN 1-56592-260-3.
[A wonderful source of ideas, and tons of utilities you may end up
building from the source code, using the methods discussed in
this article.]

Stallman, Richard M. and Roland McGrath: GNU MAKE, Free Software
Foundation, 1995, ISBN 1-882114-78-7.
[Required reading.]

Waite, Mitchell, Stephen Prata, and Donald Martin: C PRIMER PLUS, Waite Group 
Press, ISBN 0-672-22090-3,.
[Probably the best of the introductions to C programming.  Extensive
coverage for a primer.  Newer editions now available.]

Welsh, Matt and Lar Kaufman: RUNNING LINUX, O'Reilly and Associates,
1996, ISBN 1-56592-151-8.
[Still the best overall Linux reference, though lacking in depth
in some areas.]


The man pages for dpkg, gcc, gzip, imake, ldconfig, ldd, make, nm, patch,
rpm, shar, strip, tar, termcap, terminfo, and xmkmf.


The BZIP2 HOWTO, by David Fetter.

The Glibc2 HOWTO, by Eric Green

The LINUX ELF HOWTO, by Daniel Barlow.

The RPM HOWTO, by Donnie Barnes.

The StarOffice miniHOWTO, by Matthew Borowski.

[These HOWTOs should be in the /usr/doc/HOWTO or /usr/doc/HOWTO/mini directory on your system. Updated versions are available in text, HTML, and SGML format from the LDP site, and usually from the respective authors' home sites.]

17. Credits

The author of this HOWTO would like to thank the following persons for their helpful suggestions, corrections, and encouragement.

Kudos also go to the fine people who have translated this HOWTO into Italian and Japanese.

And, of course, thanks, praise, benedictions and hosannahs to Greg Hankins and Tim Bynum of the Linux Documentation Project, which has made all this possible.